Iomega used on NEC - FZ110A, for Iomega Atapi Zip-100 Storage Driver

Iomega used on NEC - FZ110A, for Iomega Atapi Zip-100 Driver. I needed a driver for a "Generic" NEC Zip-100 drive, and tried the (iodrv-wme-x86-306.exe)listed. It worked, but didn't integrate the drive into the O/S properly [I had an external actual Iomega Zip-100 that I removed, and the "old" drive letter was still shown in places, which didn't work - Duh!, and the new drive WASN'T shown in all places]. This is a large file, but even with the Generic NEC drive, you'll get the proper drive letter, icon, tool set, and full drive operation. It will also REMOVE any "old" Iomega ZipDrive info you have on your machine. BUT - if you don't "remove" the hardware (from your device properties) BEFORE you install this file, be sure you do so BEFORE YOU RE-BOOT! Then, on re-boot, it will detect all your "Iomega" devices (any generic ones, too), and you'll be good to go. Good luck - it worked GREAT for me, and cleaned things up, too.