Model: T348
Category: Driver
Operating System: DOS (Note: might work with other versions of this os.)
File: Ma348.sys
Comments:
Trantor T348 Driver. 1.At C \2.Edit Config.sys.3.Add line-->Device=C \[scsidriverlocation]\ma348.sys /I [x] (for [x] = IRQ of card) Note that iomega drives need to use 9 or above and many cdroms use 11. You can usually reset the switches or jumpers to reassign. Consult card documentation or if you don't have it
File Contents: you will have to do some experimenting. If the card has a bios
chip on a socket, it can be disabled by removing it and resetting the switches. Also, for an IOMEGA zip drive, a Guest.exe 'command' is needed
in Autoexec.bat
No file content information available at this time.